More TC1840H garden cart repair
The TC1840H
garden cart has taken some heavy use this firewood season, and an
important welded spot near the front worked its way loose. Since the
steering bracket is just below the frame I decided to secure
the troubled spot through both pieces to add some additional strength.
It was easy to drill the four holes, although it might be neater to
space them apart just a wee bit more to avoid the washer crowding seen
here in the picture.
Lucy was eager to be the first to test out the new repair, and then she
promptly asked for her evening walk.
Or explore more posts by date or by subject.
About us: Anna Hess and Mark Hamilton spent over a decade living self-sufficiently in the mountains of Virginia before moving north to start over from scratch in the foothills of Ohio. They've experimented with permaculture, no-till gardening, trailersteading, home-based microbusinesses and much more, writing about their adventures in both blogs and books.
Want to be notified when new comments are posted on this page? Click on the RSS button after you add a comment to subscribe to the comment feed, or simply check the box beside "email replies to me" while writing your comment.
Were this cart has been repaired I have not had any problems, with 3 of them. But I have had to retire 2 of the 3 because of the wheels/rims breaking at the hub weld. and my thiird cart is now down to the last of the spaer wheel from the other two parts cart.
I've even welded the hubs back! I like the size of this cart but don't loke the fsct that I've boke 10 of the 12 hubs/rims for them...