
ATV garbage hauler details
First I placed a 3.5 foot 2x6
on top of the hitch
height adjuster and
traced the square hole.
Then I cut the hole out so it
sungs onto the metal with a short support on each bottom side.
10 inch decking boards go on
the sides to act as a wall and to have a place for the eye bolts where
the bungee cord gets secured.
19 inch decking boards are
used as the two extended supports with a 2x4 to level it out.
Want more in-depth information? Browse through our books.
Or explore more posts by date or by subject.
About us: Anna Hess and Mark Hamilton spent over a decade living self-sufficiently in the mountains of Virginia before moving north to start over from scratch in the foothills of Ohio. They've experimented with permaculture, no-till gardening, trailersteading, home-based microbusinesses and much more, writing about their adventures in both blogs and books.
Want to be notified when new comments are posted on this page? Click on the RSS button after you add a comment to subscribe to the comment feed, or simply check the box beside "email replies to me" while writing your comment.
Add a comment